The first snow and Halloween

Will enjoying the fist snowfall of the season

This past weekend we had our first snow fall.  We didn’t get too much snow and didn’t loose power – even though most of the north of the state got a pretty good dumping of snow.  There are a bunch of people that are still without power.  It seemed like it was almost the opposite of hurricane Irene (where the coast got most of the damage)

We took most of the morning Saturday to visit the Crystal Mall and go shopping for Halloween costumes for the boys (and the adults).  We had intended to stop by and get pumpkins on the drive home.  However we were a bit late – the local orchard was all sold out.  What do you expect, waiting until last minute (hopefully I’ll do better with my Christmas shopping).  Susanna wound up heading into Ledyard to pick up pumpkins after we had all returned from home.

Carving Pumpkins

Later that afternoon we carved the pumpkins.  The boys drew faces on each pumpkin, and Susanna and I did our best to carve to the plans – or at least to the intended plans (when Will got upset because he couldn’t get the teeth drawn the way he wanted them).

The boys went to their mother’s house on Sunday morning, and back here on Monday for Halloween.  We had decided to head to Taftville to do trick-or-treating – it was a little closer than the other options. They have a parade, which I had forgotten about until we were there.  The fire department and police block off the main street, and all the kids walk from one end of the town to fire station on the other side – following a procession of fire trucks and police cars.

Will and Ben hit as many houses as they could until the parade swept them up.  We followed the fire trucks in a huge crowd of ghouls, goblins, monsters, and witches. The trail ended at the Taftville firehouse for more candy and ice cream (ok, not sure why they serve ice cream – everyone is cold by that time of night).  And we were home with time for the boys to sort and trade (and of course eat)their candy.

The boys - looking as scary as they can
Susanna and me - looking our finest for Halloween (picture thanks to Ben)
On the road in Taftville, CT

A weekend wall shelf (or two)

Shelf for Ben's room - dry fit check

Ok, so it is taking me longer than a weekend to build the two.  But I haven’t been only working on them (I am of course still doing storm windows and spending time moving my 200 bdft of cherry into the workshop loft (and rearranging the loft).

I am building two identical shelves.  One for Ben, and one for Will.  Both are made from Birch.  I have the pieces milled and cut to size for both shelve and backs.  This past weekend I routed the dadoes for the shelves on Ben’s shelves and tonight I finished cutting the back to shape and doing the edge profile on the back.  The back is pretty thick, almost a full 2″ thick.  The shelves are milled just a bit thicker than 3/4″.  I’m copying the design from the Wood Whisperer weekend shelves.

Tomorrow I’ll finish sanding the parts, and glue up the shelves.  The bottom two shelves are glued (and reinforced from the back with screws).  The top shelf is just set into the dado (The screws to hang the shelf go though the dado behind the top shelf.   Then a coat of shellac (or maybe two to give the wood a little more color) and finally I’ll attempt to spray a water based pre cat varnish (I picked up Agualente in satin by ML Campbell and will use an Earlex HVLP system – my first attempt to spray a finish on one of my woodworking projects).

Overall the project is turning out pretty nice.  Hopefully I won’t completely screw it up with the spray finish…  The dadoes fit pretty well.  I didn’t have the proper router bit (a top bearing pattern bit) so had to sneak up on the size.  The bottom dado was a little loose, but that was fixed by gluing a hand plane shaving into the dado.  I ordered the proper router bit for the second shelf.

A little break from the house projects

Susanna in New York

On Sunday, Susanna and I took a day trip to the city.  It was a perfect break.  The weather was warm.  Too warm for October – almost 80.  I dropped the boys off in the morning, and we headed to New Haven to catch a late morning train to New York.

We got there just in time for a late lunch and a nice afternoon walking around – ending the afternoon at Bryant Park.  Of course, it is much better to to read about the trip in Susanna’s blog – “Nutrition for my urban soul” (it might be easier to read using Google translate… at least it is for me).

Today I decided to take an easy day.  I was planning on picking up some rough cut cherry in western MA, but decided to hang out at home instead (I’ll get it next weekend).  It was another perfect day for house projects (Ok, I only took a little break from the projects this weekend).   I did some more painting of storm windows, and started working on the next woodworking project.  I’m making a pair of shelves for the boys rooms ( the weekend wall shelf found wood whisperer website – but out of birch).

Epoxy repairs to the bottom of the storm sash for the bathroom window.

Tonight, Susanna and I headed to Providence to take a swing dancing class.  We got there and stood outside with the other students waiting for the instructor to show up for about 30 minutes… then gave up.  We decided to have some cheesecake on the statehouse steps in Providence – a nice way to end the evening.

Windows, windows, trim, pizza (and a sleepover for Will)

The new trim colors

It seems like all I write about is fixing the windows in this house.  Maybe one of these days I’ll have something more exciting to write.  I’m pretty sure Susanna is getting tired of having to check out each window after I paint the trim and put in a storm window.  And to top it off, she gets to read more about it in this blog…

I think we finally committed to a trim color scheme.  It is Rookwood Dark Green (Sherwin-Williams) trim with Rookwood Dark Brown accent colors.   We are still discussing what color to paint the house (I’m thinking that the house may get painted next summer – so I’ll live with unmatched trim for a while – I think the white is a bit to bright compared to the dark trim).  I also found out that Will has a difficult time telling the difference between the green and brown trim colors.

Painting the storm window

I dug out all the existing storm windows from the basement (and barn) yesterday.  I started repairing the one that is in poor shape and painting the rest.

I installed the new storm window hanging hardware from Kilian Hardware.  It is much nicer (and a lot more expensive at $20/set).  I had been trying to find a better way to latch the storm windows in – and these seem perfect.

I’m guessing this will be the last long warm weekend of the year to work on the house – which is good – I’m almost out of green trim paint and am holding out until the spring to get another gallon.

A not so clear picture of the new latch - it fits over the exterior stop and pulls the window tight

In addition to a busy day working on the house, we had a crazy kids day here. A little before lunch, the boy next door, Justin, came over to play.  Then after lunch, Ben invited his best friend, Anthony, over.  A little later, Will’s best friend, Shane, came over.  Everyone stayed through dinner (homemade pizza) and a movie (“Matilda”).  Justin and Anthony went home, and Shane stayed over for a sleepover (Will’s first and Shane’s first at another house).

So, here we are at 9pm, with Will and Ben asleep, and Shane down here talking to Susanna.  It is never easy to sleep in a new place.

Two windows with painted trim and storm windows installed. Window sashes will be brown when I get to repairing them.
Front porch with trim painted.
The boys watching "Matilda" (picture thanks to Susanna)

More window work….

I’ve started the outside window work that I want to complete this fall… storm windows.  The goal is to replace as many of the crappy storm windows as possible.  I set up the scaffolding below one of the windows in Ben’s room and took off the storm window.  I am taking the time to paint the trim when the storm window is out.

Broken exterior stop

When I removed the storm window, I found the exterior stop cracked.  I pulled out the bottom half of the stop, and milled a replacement (which I installed this week).  Note to self: it would be much easier to install the stop with a nail gun next time.  It was a real pain to hold the stop next to the window and nail it in on the same time…. a nail gun would have solved that problem.  It doesn’t help that the scaffolding is a little short for working on that window as well (yes, I’ll get pins to stack the scaffolding before the next window).

Susanna and I decided to paint the trim green around the windows.  It looks much better – I’ll take pictures the next day it isn’t raining.  We are thinking about painting the storm windows brown.

This past weekend I dug out one of the old original (wooden) storm windows to replace one of the broken aluminum storm windows in the living room.  I removed the glass and primed and painted half of the storm window.  Next to paint the rest and hang the window.  I ordered more glazing compound and a new style of window hanger (they look much better than the ones I had been using).  I also ordered some weatherstripping to put between the storm window and the stop.

This weekend I’ll get the brown paint for the storm windows, and hopefully get some of the storm windows installed and more of the trim around the windows painted.  Thursday I’ll swing by the glass store to get replacement panes for the original storm windows and see my options for removable panes for the storm windows on the second floor… Let’s see how much I get done before the weather gets cold.

A saturday afternoon bike ride

On our bike ride

This afternoon we decided to take a bike ride and explore  one of the local rail-trails – the Airline State Park Trail.   I had to dig out Susanna’s bike, fill up the bike tires, and find everyone’s helmets.  We packed the four bikes into the back of the mini-van, and headed out to find the trail.

We had a great ride – enjoying the cooler weather.  I’m not quite sure how far we rode – the bike computer’s battery is dead.  But it is sometimes nice to just ride and not worry about how far you have gone.   Tomorrow I’ll get back to work on the house – get the scaffolding set up to work on Ben’s window and pull out a couple of the lower storm windows…. getting ready to replace storm windows before the winter.

The Airline Trail
Susanna and Ben riding over the bridge
View from the trail

Another Project Completed

Lumber Pile in Garage Bay

I completed one of my short summer projects – just in time to head to Australia.  I built a much better lumber stack in the unused garage bay.  It had been sitting in one of the bays where I park, but I needed to make the stack flat so the wood wouldn’t dry bowed.  I also made the stack 4-feet deep vice 2-feed deep.

I had forgotten how heavy the red oak planks were.

I may someday move more lumber into that garage bay, but not this summer…

And it is finally finished

Ben's new room

I finally finished Ben’s bedroom today.  Almost all the tools are back in the shop (ok, one more trip left).  I just finished touching up the paint – but it is a boy’s room – so touching up paint could be a weekly project if I desired.

He now wants shelves in his closet – but I’m counting that as a second project.

Now off to the movies (something to do on a rainy day) – then to Target to get some storage bins for Ben.  He is slowly in the process of moving his stuff from his old room to the new one.  I won’t show a picture of the big pile of toys and stuff he has in his old room – I’m hoping he decides to go through it and throw a lot out.

A broken window…

Will helping repair his broken window pane
Will helping repair his broken window pane

The afternoon started off well.  The boys were about as expected, running around with their friend, Justin.  Of course at times it got a little out of hand.  Of course one of those times, Will got in trouble (don’t worry, Ben got in trouble as well the other time).  So he got a time-out in his room (and yes, for those without kids, time-outs do work).

I’m outside with Ben and Justin – I have my phone set to go off when Will’s time-out is over.  From above, I hear the sound of glass breaking – from Will’s window.  I run upstairs – a little angry- I’ve assumed the window broke because he was angry and threw something that broke the window (hey, seems fair – the usual cause of broken windows is things being thrown ).

Well, it turns out that he wasn’t throwing things.  He had just been leaning with his hand on the window pane and it broke.  And he was upset – upset about the time-out – scared he had broken his window (there was glass all over the floor).  Thankfully the only thing on him was a small scratch on his arm (I am VERY thankful for no trip to the ER).

So, after he calmed down (and I calmed down), I sat down with him.  I told him that he wasn’t in trouble (it was an accident), but that he needed to help fix the window.  That made him more upset (he wanted to play with Justin).  I told him it wouldn’t be all afternoon – if I break a window, I am expected to fix it, so it seemed fair if he helped.

I think he must have realized that it wouldn’t be fair to play the whole time I was working on fixing the window he broke – he complained a little bit, but did help with the window.

We carefully cleaned up the broken glass (work gloves and shoes on).  Then off came both stops, and out came the sash.  I don’t know why, but the stops on this window have only one screw in the middle, and nails on the top and bottom.  Maybe I’ll change it to three screws each tomorrow when I put the window back together (like the rest of the windows in the house).

Will cleaned out the rabbet where the broken pane had been (lots of nice old hardened putty).  I removed the other pane (the putty was in bad shape – and since he had only broken the one pane, Will didn’t have to help with that pane). Then Will was back to paint the sash.  After the paint had dried to the touch, we put a new piece of glass in (strangely enough I had a new piece of glass sitting around the right size), and reglazed the window.

I use Glaze-Ease from Advanced Repair Technology, Inc. to glaze the windows.  I love the fact that it can be painted 2 hours after glazing (traditional glazing needs to cure for several days prior to painting).  It comes in a caulk tube and they have a special tool to get the finish to look like traditional glazing.  I’m still working on getting it to turn out perfect – but this is a second floor window, so no one will see the glazing job.

Tonight I painted the glazing and removed the tape.   Tomorrow I’ll second coat the glazing, and Will and I will wax the sash where it rubs against the parting bead and stop (keeps the paint from sticking) and put the window back together.

So Will gets one night without a lower sash (he still has a storm window).  And he had a lot less play time this afternoon than he had originally wanted.

On the good side, Will learned how to take the lower sash off a double hung window and replace a pane of glass.  Another good thing – that window sash was in the worst shape of all of them in the house – so reglazing and repainting was needed.  Even better – I got to work on a project with Will for a good part of the afternoon.  And I’m pretty sure he won’t lean on a window again.

Making the baseboard trim

Ok… so the room isn’t totally done.  Just almost done.  Yesterday I made the baseboard trim.  I had decided that I wanted trim that was taller than I could get at the box store, so I purchased a router bit to make the molding.  Initially I was going to use some of the red oak I have sitting around to make the trim.  But that would require me milling the lumber.  And since it was going to be painted anyway, I started with 1×8 pine from home depot.

The router bit for making the trim

First I made a test piece from a piece of a 3/4″ x 7 1/4″ board I had sitting around.

The sample piece of baseboard trim

This allowed me to check the look of the trim before I decided to go purchase the lumber.

Test fit of trim - chcecking how it matches up with the door trim.
Checking the fit - relative to the outlet placement

After Ben and I had agreed that the trim was a good fit to the room, I went out and picked up the lumber and spent the afternoon milling the baseboard trim and priming the trim.

Today, I plan on painting the trim, and will put it in tonight (or later this week if the paint isn’t dry enough to install today (It is humid and raining – it may take longer to dry than normal).

At least Ben has been sleeping in the new room – he is very happy to have a larger room.  He just hasn’t moved all his stuff over; he is waiting for me to finish the trim before he does that.