Of course, I’m posting this on Day 3 early in the morning from Caffe Nero
After coffee, the we all sat down for a late breakfast at the hotel. The we headed off to find a hop-on hop-off bus tour of the city. We didn’t have to walk far until we were accosted by a woman selling tickets for a bus company. But we did have to wait a while until the bus arrived. And, yes London is cold this time of year.
Rebecka, Susanna and Karolina (left to right) hanging out at the "Blue Door"
We took the bus to Notting Hill, and walked through the shopping district until Susanna, Rebecka and Karolina found what they believed was the blue door from the movie “Notting Hill.” Susanna kept trying to get me to ask for directions – I said I didn’t want to be the first guy in history to be looking for the blue door from that movie. I’m pretty sure Hugh Grant had someone to tell him where to go.
After that, back on the bus until we got to the Thames near Big Ben and the London Eye. We walked a bit, found lunch (after a try at a hotel, where the other patrons said they were waiting for over an hour for their food). Then to the London Eye for a trip up and down. Or rather around.
Then back to the hotel to warm up. We took the tube back from Westminster. We waited a while for the circus line to come, but then wound up having to take the green line (I can’t remember what it is called right now). Only after we got to the next station did I read the sign that said the circus line was shut down for the weekend due to engineering work. We would have waited a very long time for the train if we weren’t so impatient.
Dinner was at a local pub. I had a steak pie. The fine local cuisine. And beer. Tomorrow (or rather today, when I get to post this) will be to the British Museum and maybe some more walking around, with a show in the evening.
I had a nice coffee with Rebecka and Karolina this morning. We met at the Caffé Nero pretty early (8AM). The whole family is meeting at 9:30 to eat breakfast in the hotel. I wanted to get up early enough to get on the proper time zone. Karolina suggested doing an Internet free vacation. I’m not sure I want to do that, but I’ll cut back on checking the Internet.
Rebecka asked about my job. She asked how I felt working on something that was designed to kill people. I said that was a good question – difficult to answer. I have thought a lot about that, though not as much recently as I probably should. I do accept what I do, and think it is important. Though I really hope what I work on is never really used. I hope for peace, but am not a pacifist. My quick answer is that I think of it like a police officer carrying a gun. He wants to make sure it works, and that he can shoot well. But I’m sure most of them don’t ever want to use one for real. Maybe that is just a superficial answer to a difficult question.
We also talked about blogging. I think I write to give myself a record of what I do. It is a journal for me. I used to write a private journal. I can go back and find books with entries from random times in my life. I was never consistent with my writing. I am much more consistent with writing for my blog. Maybe it is the public nature that make me more willing to write. Though I mostly write it for myself – not for my two readers (thanks for reading Mom and Susanna).
London. We made it. Our journey took us on Air Canada from Boston to Toronto then to London. It is nice to fly a non-US airline once in a while. The accommodations on the aircraft were much nicer than the normal United aircraft – individual entertainment centers.
The flight across the pond was an overnight flight. The trick is to try to get as much sleep as possible. In the past, I had tried the Tylenol PM route. It knocks me out, but I feel pretty groggy the entire next day. This time I tried melatonin. Susanna slept most of the flight with the melatonin. I slept for the first 4 hours. Not as long as with the Tylenol, but better than nothing.
We arrived in early afternoon. We couldn’t check into the hotel until Susanna’s parents arrived – so we dropped off the bags and walked around Kensington High Street. We found a nice Italian place for lunch – though apparently it is a chain restaurant.
After Susanna’s family arrived (Dan, Charlotte, sister Rebecka, and cousin Karolina) we checked in, unpacked and headed out to a nice dinner at another local Italian restaurant. Since we had turned right on Kensington High Street today for lunch, we turned left and found the first place to eat. We enjoyed a nice dinner and good conversation. We did end the night discussing the upcoming election in the states, which was a decidedly unintelligent conversation. Or more correctly, a conversation about the unintelligent.
Internet is a pain here. No free internet in the hotel. I’m too cheap to pay for internet, so I’ll post this tomorrow from a free Wi-Fi hotspot at a café up the road. I’m also pretty tired tonight from the lack of sleep last night – so if this blog makes no sense, that is my excuse (plus I never proofread anything anyway – it is just too boring to try and get it right).
Tomorrow’s plans are (though I’m pretty sure they have changed a bit) – in order:
Frukost
Kyrkbesök
Lunch
Hop on Hop off+buss
Afternoon Tea
Ev Spa
Kvällsmat
Of course the agenda is in Swedish (or it seems more like Swenglish). Frukost is breakfast (food is important). Lunch is lunch (I needed special help from Susanna with that one). Kvällsmat is dinner. Which covers the important events of the day. I’m pretty sure “Afternoon Tea” is English and the second one has something to do with a church.
I’m meeting Rebecka before frukost tomorrow to go grab coffee and free internet. Actually, I think it should be free “Internet” not “internet.” Not sure Susanna will be up in time to get coffee. Of course I’ll either amend this in the morning (or just add a note if she makes it).
We are getting ready for travel tomorrow. Susanna is trying to get over her cold. I packed most of my stuff tonight. Tomorrow I’ll have to take the dogs to Mark and Jessica’s house. Getting ready for a big trip means lost of miscellaneous chores around the house – packing and cleaning. Tomorrow afternoon we head to Boston for the flight to London to vacation with Susanna’s family.
I’ll try and post more pictures this year on the blog. Today I ordered a printed book made from the 2010 and 2011 entries from the blog from www.blog2print.com. The book should show up in early March. I’ll need to make sure that I upload higher quality pictures in the future, so when I print it the quality of the pictures is acceptable.
One of our family friends have started blogging about their life on a small family farm here in Connecticut. You can read about their farm here. We’ll have to start getting eggs from them.
I have a couple of clamping squares – they are useful for making sure that corners are perfectly square when I do glue-ups. I have one from Woodpeckers Precision Tools. It is a beautiful piece of machined aluminum:
Woodpeckers clamping square
I love the the tools from Woodpeckers. All the ones I have used are high quality and precise. Not the cheap tools one can get from the local stores.
I have two larger plastic clamping squares from Rockler. They are plastic, and of course don’t have the fine feel of the machined aluminum. However, they are a little larger (and easier to clamp), and work just as well for the projects I have needed them for. They are also a little cheaper:
Clamp-it square from Rockler Woodworking
I only have 3 total clamping squares and have been able to get by with that many. Another 2 would be useful at times. I might recomment starting with a pair of the aluminum ones, on sale now at Woodpeckers. The Woodpeckers tools are made in the USA as well.
It seems in the workshop one either needs one or two clamps at a time for a project, or two shops worth of clamps for a glue-up. Never anything in-between. I’ve had to glue the face frame to the bookshelves in individual pieces because of my limited number of clamps. However, the current arrangement of the workshop makes it nearly impossible to walk all the way around the case when it is on the saw horses. So maybe it is good that I didn’t have enough clamps to attempt a big glue-up at once.
Attaching one side of the face frame to the shelves
The project overall is coming along pretty quickly. It is amazing how quick a project can be done when using sheet goods (can you say no milling of lumber).
On the down side, the top that I glued up isn’t deep enough with the face frame attached. Luckily, I have a spare piece of cherry milled and ready (hey, I do eventually learn – to mill up extra lumber) to cut and glue to the top to get it deep enough. Now if I had more clamps to do the glue-up while the face frame dries. I guess it doesn’t matter – I can’t get to the table saw with the case in it’s current location. And I don’t want to move it with the glue drying…
I was able to finish two of the shelves (build, glue edging on, one coat of shellac, and 2-3 coats of spray varnish). They turned out pretty nice. Cherry is pretty light colored right after finishing. A couple of months exposed to light and hopefully it will turn darker.
Shelves after spray finish (plus a table leaf that had been sitting in the basement for years just waiting for me to finish).
Writing in my blog – a good way to spend filling the time between the glue-up and when I can take the clamps off (and move the shelves). I think it may be time to get more clamps. Maybe a pack of 24-inch clamps from USA Clamp Company. I have 5 clamps made by them, and I love them. Plus they are way cheaper than the bar clamps purchased at most woodworking supply stores.
The bookshelf carcase naked - needs back, face frame, shelves and top...
After assembling the carcase, I started milling and building the rest of the bookshelf. I milled the face frame and shelf fronts from a single 72″ section of cherry. The shelf panels have a 1″ tall piece of 3/4″ thick cherry glued to the plywood. I decided to use a little taller piece of wood than the 3/4″ thick shelf. The wood will be flush on the top, and extend slightly below the shelf. Having a thicker piece of wood will add some rigidity to the shelves so they won’t sag under the weight of books.
Two of the four shelves glued up with a solid cherry edge piece
I glued up the top from two pieces of the cherry. I set it on the top of the shelves and it had a decent overhang and room to cut the board square. However I forgot that the bookcase will have a 3/4″ cherry face frame attached (Duh). Not sure if the top will be big enough. Luckily I have another piece (or two) of cherry milled that I can add to the top panel if needed.
The top panel glued up
The edges to be glued were jointed on the power jointer. However the jointer didn’t leave the best edge for gluing (I think it needs new blades), so I used a hand plane to do the final jointing prior to glue up. The trick is to make sure both edges are perfectly square to the faces (that they aren’t on this panel can be seen by the very slight bow in the panel when I hold a straight edge across it. I’ll have to remember to keep checking the edges with the square when I use the hand planes… I’m hoping that the slight bow in the top will just be a design feature (either to cause water to run off the front and back – if the the convex side is up – or a place to store tennis balls where Tucker can’t get them – if the concave side is up).
I started a new project this weekend. We are in desperate need of a set of bookshelves for the study – all the books are in boxes on the floor for now (or in the barn). I had been searching the web to find a simple plan that allowed a set of shelves to be made from one sheet of plywood.
I found this link. I am using the same basic dimensions for the bookshelves – however the construction of the carcase is using pocket-hole screws not biscuit joints. I looked at picking up plywood from GK Woodworking in Griswold. Susanna and I discussed either making the shelves out of red oak (total cost about $125 – I had plenty of red oak on hand for the face frame and top) or cherry (total cost of about $250). We decided to go with red oak.
On Saturday morning I called GK Woodworking and asked about picking up some red oak plywood. He had sold his last 3 sheets of red oak that morning (apparently he sells very little red oak, but of course in one day he had two people interested). So cherry it was. Will and I headed off to pick up the lumber (while Susanna took Ben to his piano lesson). Twenty minutes and $245 later I had a piece of 3/4″ cherry plywood (for the shelves), a piece of 1/4″ cherry plywood (for the back) and 9 bdft of 4/4 (1″ thick) rough cherry. Not exactly low cost bookshelves – but I imagine that to purchase shelves already made would cost much more.
Cherry lumber for low-cost bookshelves
Saturday afternoon I spent a couple of hours cutting up the 3/4″ sheet of plywood (2 sides, 1 top, 1 bottom, and 4 shelves). I cut the rabbet on the two sides to hold the back, drilled holes for the shelves (I will use pins to make the shelves adjustable) and assembled the carcase. I will use solid cherry on the top to cover the top piece of plywood (and hide the ends of the sides).
The pocket-hole joinery is quick and easy – if you can hide the screws. On this project the carcase is made from two shelves (top and bottom) and two sides. The pocket hole screws are on the top side of the top. That surface will be covered with a solid cherry top (not yet sure how I’m going to attach the top yet – but hey, why plan everything at once). The screws are attached from below the bottom shelf. That shelf is 2 1/2″ from the bottom of the sides, but won’t be visible unless one turns the shelves upside down.
Shelf pieces cut from plywood sheet
Tonight I milled the lumber for the face frame and the shelf fronts. The next step is to clean up the face frame, cut to length and glue the frame to the carcase. The glue is plenty strong to hold the face frame to the carcase.
A couple of things I have noticed so far in this project:
My shop is not designed to easily handle 4×8 sheets of plywood. When I rearrange, I will have to leave a space large enough to cut down sheet goods.
The 100 tooth saw blade that came with the table saw does a beautiful job on cutting the plywood.
The cabinet grade plywood is MUCH nicer to deal with than the crap you get at the home center. No voids in the middle, and the veneer is significantly thicker than the cheap stuff
I had to crosscut the sheet with my circular saw – the blade on that saw did not leave the nicest edge
I have a couple of variations of this shelf in my mind to try. The shelf might look good with corner posts, though I would do them a little differently from the Woodworkers Guild of America link above – I would make them out of the same material as the shelves, and most definitely taper the legs. I might make the decorative top out of plywood, edged with solid wood – it would make attaching the top simpler and more sturdy. The problem with attaching the solid top to the plywood carcase is that the solid top will shrink and swell with the room humidity. The plywood is stable with changes in humidity (which is why the carcase and shelves are made from plywood – much better for this type of project than solid wood).
I think a shelf pin drilling jig, such as this one from Woodpeckers would make drilling the shelf pin holes much simpler and more accurate.
Looking ahead, I am thinking about building a kitchen island. Again, I want it to be simple and inexpensive – so I’m still thinking of options.
Here is the crown molding in the living room. The colors didn’t come out the best – I may have to retake the picture during the day. I finished touching up the wall paint tonight. The trim has a dart and egg pattern on it, but it is subtle. I also felt that the ceiling was too low for “normal” crown molding. The corners are mitered (no coping this time) and the edges caulked where the trim meets the wall and ceiling.
Living room crown molding
And yes, as Susanna pointed out, I still have one project to finish (I did notice that it didn’t take long for her to comment on my post pointing out that I needed to work on patching one of the walls):
Wall repair in progress (the plaster crumbled when I replaced the outlet)
Also, here is the new boiler. I took pictures of the new steam piping as well, but I’m pretty sure just a picture of a boiler is enough to bore everyone. Yesterday we also got a delivery for 245.6 gallons of oil. That is cutting it pretty close on a 250 gallon tank. And will also cost a small fortune. I will spend time this summer doing more work on the windows to hopefully reduce oil use even more next year.
The boiler is a Peerless ECT 03 with a domestic hot water coil. The project included installing the boiler, the direct vent through the window, installing a Hartford loop and replacing steam pipe above the boiler to correct the pipe pitch. The furnace was installed by Curries Heating and Plumbing.
We had a new boiler put in this week. I’m very thankful that the weather wasn’t too cold – there was no heat for two days (okay, really for one night). The heating company did give us portable heaters, and hook up a temporary hot water heater, so we weren’t totally left in the cold. The new system was on-line yesterday evening, and today they finished flushing the system and adding new air valves to the radiators.
It should be a major improvement. The installer said I would probably get a 40% savings on oil from the new system (I’ll have to wait to see on that one), and we won’t have problems with hot water. The old boiler also had a hot-water on demand system, but it couldn’t heat water up fast enough for the normal usage in the house (it worked for a shower, but not if anyone else used any hot water). The new one is working much better (we tried it last night). The other big change is that it is power-vented out the basement window. I can now have the chimney taken down, which greatly eases the next renovations in the house (putting a bathroom on the second floor and redoing the kitchen). The chimney went in the middle of one of the upstairs bedrooms and in the wall between the kitchen and pantry.
I probably will wait until later this summer to have the chimney taken down to below the roof line (I’ll take it down the rest of the way as needed for renovations).
My dad visited for the weekend and helped me finish one more of the outstanding projects. We installed the crown molding in the living room. I painted the trim on Monday evening. Tonight I’ll touch up the wall paint were the tape pulled a couple of (small) sections off.
So, for once, I don’t think I have any ongoing projects. All the house projects are done, and I don’t have anything in the workshop. Maybe I’ll go with Will on Saturday to the lumber yard, and we can get plywood for the bookshelves.
